Remedy:
Program Continuation:
Channel %1 block %2 no tool compensation active
%1 = Channel number %2 = Block number, label
Alarm triggered by following cycles: LONGHOLE, SLOT1, SLOT2, POCKET1 to POCKET4, CYCLE71, CYCLE72, CYCLE90, CYCLE93 to CYCLE96.
- Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
D-correction must be programmed before the cycle call.
Clear alarm with the RESET key. Restart part program
© Siemens AG 2005 All Rights Reserved