Remedy:
Program Continuation:
Axis %1 drive %2 communication failure
%1 = Axis name, spindle number
%2 = Drive number
The drive is not communicating.
- Mode group not ready.
- The NC switches to follow-up mode.
- Channel not ready.
- NC Start disable in this channel.
- Axes of this channel must be re-referenced.
- Interface signals are set.
- Alarm display.
- NC Stop on alarm.
Check the bus configuration.
Check the interface (connector removed, option module inactive, etc.). Clear alarm with the RESET key. Restart part program
© Siemens AG 2005 All Rights Reserved