22250
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
Channel %1 spindle %2 axis stopped during thread cutting
%1 = Channel number
%2 = Axis name, spindle number
The thread cutting axis has been stopped while a thread block was active.
The stop can be caused by VDI signals that cause the feed to be interrupted.
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Please inform the authorized personnel/service department. Check the axis-specific/ spindle-specific stop signals (DB 31 - 48, DBX 4.3).
Clear alarm with the RESET key. Restart part program
1-1111
© Siemens AG 2005 All Rights Reserved