Channel %1 block %2 axis %3 is no machine axis
%1 = Channel number
%2 = Block number, label
%3 = Axis name, spindle number
At this point, the block context calls for a machine axis. This is the case with:
G74 (reference point approach)
G75 (fixed point approach)
If a geometry or additional axis identifier is used, then it must also be allowed as machine axis identifier (MD 10000 AXCONF_MACHAX_NAME_TAB).
- Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Use machine axis identifier when programming.
Clear alarm with the RESET key. Restart part program
© Siemens AG 2005 All Rights Reserved