Program Continuation:

Channel %1 block %2 invalid index for indexing axis %3

%1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

The programmed index for the indexing axis is beyond the position table range.


Perform an absolute approach of the 56th position in the list allocated via the axis-specific machine date 30500 INDEX_AX_ASSIGN_POS_TAB with the 1st positioning axis, the number of positions is e.g. only 40 (MD 10900 INDEX_AX_LENGTH_POS_TAB_1 = 40). N100 G.. U=CAC (56)

Or, with equidistant distances, the programmed index is smaller or equal 0.

Or, an attempt is made with a MOV movement to travel to a position outside the permitted area.

-    Interpreter stop

-    NC Start disable in this channel.

-    Interface signals are set.

-    Alarm display.

Program the indexing axis position in the NC part program in accordance with the length of the current position table, or add the required value to the position table and adjust the length of the list.

Clear alarm with the RESET key. Restart part program

© Siemens AG 2005 All Rights Reserved