Reactions:
Remedy:
Program Continuation:
Channel %1 conflict when activating user data type %2
%1 = Channel number %2 = Data type
The "activate user data" function (PI service _N_SETUDT) modifies a data block (tool offset, settable zero offset or base frame) which is also written by the NC blocks in preparation.
In the event of a conflict, the value entered by the MMC is reset.
Parameter %2 specifies which data block is affected:
1: Active tool offset 2: Base frame 3: Active zero offset - Alarm display.
Check the inputs on the MMC and repeat if necessary.
Clear alarm with the Delete key or NC START.
© Siemens AG 2005 All Rights Reserved