Channel %1 block %2 illegal interpolation type for contour definition active

%1 = Channel number %2 = Block number, label

In one contour definition block, G01 is not active as interpolation function. In one contour definition block, the linear interpolation always has to be selected with G01. G00, G02, G03, G33 etc. are not permitted.

-    Correction block

-    Interface signals are set.

-    Alarm display.

Modify part program. Program linear interpolation G01.

Clear alarm with NC START or RESET key and continue the program.

© Siemens AG 2005 All Rights Reserved