Definitions:
Reactions:
Remedy:
Program Continuation:
Channel %1 block %2 too many tool parameters %3
%1 = Channel number %2 = Block number, label %3 = Source symbol
In the part program, in the tool offset file (..._TOA) and in the initialization file (..._INI), no more than 5 tool offset parameters may be used per block.
Example:
N ...
N 100 $TC_DP1 [5,1] = 130, $TC_DP3 [5,1] = 150.123,
$TC_DP4 [5,1] = 223.4, $TC_DP5 [5,1] = 200.12,
$TC_DP6 [5,1] = 55.02
N ...
- Correction block
- Interface signals are set.
- Alarm display.
Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM CORRECT. The correction pointer positions on the incorrect block.
Divide up the part program block into several blocks.
If necessary, use the local variable for storing intermediate results.
Clear alarm with NC START or RESET key and continue the program.
© Siemens AG 2005 All Rights Reserved