Reactions:
Remedy:
Program Continuation:
Channel %1 block %2 incorrect stock removal contour
%1 = Channel number %2 = Block number, label
The following errors occurred in the subroutine for the contour during stock removal:
Full circle
Overlapping contour elements Wrong start position
- Local alarm reaction.
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
The errors listed above must be corrected in the subroutine for the stock removal contour. Clear alarm with the RESET key. Restart part program
© Siemens AG 2005 All Rights Reserved