Remedy:
Program Continuation:
Channel %1 block %2 helical axis is not parallel to tool orientation
%1 = Channel number %2 = Block number, label
With active tool radius compensation a helix is only permissible if the helix axis is parallel to the tool, i.e. the circle plane and the compensation plane must be identical.
- Correction block is reorganized.
- Local alarm reaction.
- Interface signals are set.
- Alarm display.
- NC Stop on alarm at block end.
Orient helix axis perpendicular to the machining plane.
Clear alarm with NC START or RESET key and continue the program.
© Siemens AG 2005 All Rights Reserved