10653
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
Channel %1 axis %2 gantry error threshold exceeded
%1 = Channel number %2 = Axis
The gantry following axis has exceeded the error limit (actual value tolerance) specified in MD 37120 GANTRY_POS_TOL_ERROR.
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
- NC Stop on alarm.
Please inform the authorized personnel/service department.
1. Check axis (uneven mechanical movement?)
2. MD not set correctly (MD 37120 GANTRY_POS_TOL_ERROR). A POWER ON is necessary after modifying the MD.
If the axes are not yet referenced, MD GANTRY_POS_TOL_REF is the trigger condition for the error message.
Clear alarm with the RESET key. Restart part program
1-298
© Siemens AG 2005 All Rights Reserved