Channel %1 machine data %2[%3] assigns an axis not defined in channel
%1 = Channel number %2 = String: MD identifier %3 = Index: MD array
Only axes that have been activated in the channel by means of the channel-specific machine data 20070 AXCONF_MACHAX_USED [kx]=m may be declared as geometry axes or transformation axes by means of the MD 20050 AXCONF_GEOAX_ASSIGN_TAB [gx]=k. This also applies to
$MC_FGROUP_DEFAULT_AXES (gx: Geometry axis index, kx: Channel axis index, k: Channel axis no., m: Machine axis no.).
Assignment of geometry axes to channel axes AXCONF_GEOAX_ASSIGN_TAB (includes channel axis no. k):
Geometry axis index: 0, 1. 0, 2nd channel: 1,2. 0, 2nd channel: 1
Geometry axis index: 1, 1. 0, 2nd channel: 2, 2. 0, 2nd channel: 0
Geometry axis index: 2, 1. 0, 2nd channel: 3, 2. 0, 2nd channel: 3
AXCONF_MACHAX_USED (includes machine axis no. m):
- NC not ready.
- Mode group not ready, also effective for single axes
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
- NC Stop on alarm.
Please inform the authorized personnel/service department.
Check and correct either
Switch control OFF - ON.
© Siemens AG 2005 All Rights Reserved