Spindle standstill monitoring-alarm(Heidenhain TNC640)

In the case of spindle standstill monitoring alarm,the standstill position monitoring window can be edited.The value is specified in the parameter checkPosStandstill.This is only a temporary solution, we recommend finding out the cause of the fault.

How to do

1.enter password 95148-video is here

2.press the MOD button

3.press the soft key Config editor

4.go to directory Axes-ParameterSets-PS1-CfgControllerAuxil-checkPosStandstill

5.press ENT and rewrite the value in the parameter